Tekla detailing · BIM · Structural engineering

Tekla detailing and BIM your shop can build from

Sixteen design engineers in Bangalore, Chennai and Baroda. We take steel and plant projects from structural design to LOD 400 models, shop drawings and NC files, to AISC, BS EN, IS, AS and CISC codes.

10+Years in industrial steel
16Design engineers and Tekla specialists
LOD 400Fabrication ready models
6AISC, BS EN, IS, AS, CISC, AWS
3Studios: Bangalore · Chennai · Baroda
Tekla model of an offshore steel truss bridge

Services

Three practices, one delivery team

From structural design to fabrication ready Tekla models, coordinated BIM from LOD 300 to LOD 400, and consultancy that keeps project models working after handover.

Tekla and structural

From structural design to fabrication ready Tekla models. Modelling and detailing, structural and connection design, estimation and MTO.

Tekla StructuresSTAAD.ProIdeaStatiCaAutoCAD
Explore Tekla services

BIM services

Coordinated models from LOD 300 to LOD 400 for plants, buildings, scan to BIM and infrastructure, including 4D and 5D.

RevitPlant 3DAVEVA E3DCOBie
Explore BIM services

Selected projects

Proven on refineries, offshore bridges and heavy plants

Working for clients in India and overseas. Refineries, offshore bridges, steel plants, copper plants, data centres, logistics parks, commercial towers, flyovers, factories and pipe racks.

Tekla model of an offshore steel truss bridge

Tekla 2019i · Eurocodes · 96.5 m · Offshore · two bridge sets

Offshore truss bridges

Full Tekla modelling and fabrication detailing for two sets of offshore truss bridges, designed to Eurocodes.

View project
Piping model for a copper plant

LOD 400 · Gujarat

Copper plant

Piping, MEP and structure coordinated with clashes resolved in the model.

View project
Factory BIM model in its landscape

LOD 350 · Andhra Pradesh

Factory

MEP and equipment coordination across the production hall.

View project

All projects →

Why it matters

Detailing errors are paid for on the shop floor

When design, connections and detailing sit with different teams, the gaps show up as RFIs, rework and late steel. Here is how we mark them up.

Usual issueRevised by Velora
Connections designed late, so detailers guess and the fabricator raises queriesConnections designed and FEA checked in IdeaStatiCa before detailing starts
Clashes with piping and MEP found during erectionSteel, piping and MEP coordinated in one model, clashes cleared at LOD 350 to 400
Drawings drafted to the wrong code, client standards missedSix design codes in daily use, your drawing standards built into our checklists
No spare capacity when three packages land in one monthA team of 16 that scales up for your peak loads

How it works

From your drawings to shop ready packages in three steps

Send your drawings and scope

GA drawings or a design model, the design code, the drawing types you need and your dates. Native files, PDFs or IFC all work.

Get an approach and a quote

A senior engineer reviews the scope, flags gaps in the inputs and sends back the approach, deliverable list and schedule with the quote.

Model, check, deliver

We model, run multi level checks and issue in agreed batches, with weekly reviews and RFIs tracked in RFI Manager for Tekla.

Trust

Checked before it leaves our desk

A DMAIC based quality system with checklists at every stage and the delivery metrics tracked on every job. Working for clients in India and overseas. 10+ years in industrial steel. Refinery and offshore steel for UK and Eurocode projects.

Quality system

  • QMS — Process maps, checklists and reviews
  • FPY — First pass yield tracked
  • OTD — On time delivery monitored
  • RCA — Root cause analysis on every issue
  • Multi level technical review cycles
  • Configuration management and revision control
  • Gantt based project and resource planning
  • RFI management, including RFI Manager for Tekla

Codes and software in daily use

AISC, BS EN, IS, AS and CISC for design, AWS for welding.

Tekla StructuresSTAAD.ProIdeaStatiCa RevitAutoCAD Plant 3DAVEVA E3D AISCBS ENIS 800 AS 4100CISCAWS D1.1

Reality capture partner: MAPPA, a FARO partner since 2016.

Placeholder

Client logos

Named clients are not published on the current site. This slot is reserved for logos released for use.

Placeholder

Certifications

No ISO or trade-body marks are published on the current site. This slot is reserved for certificates once they can be shown.

Placeholder

Testimonials

No client quotes are published on the current site. This slot is reserved for attributed testimonials.

FAQ

Questions fabricators and EPCs ask us

Which design codes and standards do you work to?

AISC (USA), BS EN and Eurocodes (UK and Europe), IS (India), AS (Australia) and CISC (Canada) for design, and AWS for welding. Tell us your client's drawing standards and we build them into our checklists.

What software do you use, and which files do we receive?

Tekla Structures for modelling and detailing, STAAD.Pro for analysis, IdeaStatiCa for connection design, and Revit, AutoCAD Plant 3D and AVEVA E3D for BIM. You receive erection, assembly and single part drawings, NC, DXF, IFC and KISS files, an Advance Material List and the native model.

Do you design connections, or only detail them?

Both. We design moment, shear, bracing and base plate connections in IdeaStatiCa with 3D FEA checks, issue calc reports with full utilisation checks, then detail from that design in Tekla.

How do you check drawings before they reach us?

Every package goes through stage checklists and multi level technical reviews under revision control. We track first pass yield and on time delivery, and run a root cause analysis on any issue raised.

Can you take on a large package or a tight deadline?

Yes. Our team of 16 design engineers and Tekla specialists is deployed flexibly for peak loads. We agree issue batches up front so your shop can start on the first assemblies early.

Do you work with clients outside India?

Yes. Recent work includes an oil refinery process structure in the United Kingdom to BS EN and two sets of offshore truss bridges to Eurocodes.

How will we know how the project is going?

You get weekly reviews and status reports, a Gantt based schedule, and RFIs tracked through to closure, including RFI Manager for Tekla. A senior engineer stays your point of contact.

Can you model an existing plant or building?

Yes. With our reality capture partner MAPPA, a FARO partner since 2016, we scan the site and build as built models with deviation and compliance reports, for renovation and plant upgrades.

Will our drawings and models stay confidential?

Yes. We are happy to sign your NDA before you share any files, and project data stays within the team working on your job.

What do you need from us to send a quote?

GA drawings or a design model, the design code, the deliverables you need (for example LOD, drawing types and NC files) and your target dates. PDFs, DWG, IFC or native models all work.

Get a quote

Send your drawings. Get an approach and a quote back.

Tell us about the structure, the code and your dates. A senior engineer reads every enquiry.